Thank you first for answer hlong19 and John.

My OS = Win7 64bit. It runs fine until the last patch. There runs no other ap in background.
Yes, i read the technical notes - but how i said it runs safely until the last patch; other players happens the same.

 3- Medal store, not sure what you're asking on this, what is wrong with medal store?

The level 90 / 115 sailors were removed without notice before; can´t stand that. Many players planed long term with that items. 

Easter Event: okay, it must not be a dice event or what else; but why no boost xp and vet con? In the past such boost events provided full rooms and many players. 

Ignore the below.

The BGP routes have failed again.

[QUOTE=JohnCheker]

 Helps from   (Official)  or...   or  or


OFFICIAL l :

[QUOTE=]
 If you are experiencing lag, first thing you need to check is your internet, try to link to internet using ethernet cable instead of Wi-Fi, check if anyone is sharing your internet or if your bit comet is download something in the background, and restart your router/modem to reset the traffic. 

If these don't work, then you can try the following steps.

Method 1:

TCP no delay, which is basically an optimization of network traffic that tries to reduce overall packet volume but can cause extra latency in the connection. This should work on Windows 7 or Vista, though the same principle can probably applied to other operating systems as well.

1.       From a command prompt (usually in All Programs -> Accessories -> Command Prompt) run “regedit”

2.       Browse to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Tcpip\Parameters\Interfaces

3.       Browse the items under interfaces until you find one that has an IPAddress entry matching the network interface you want to affect (typically LAN IP addresses start with 192.168 or 10.0); note that if your IP address is automatically assigned by a DHCP server you may need to look for a matching DhcpIPAddress instead of IPAddress

4.       Right-click on the interface and select New > DWORD (32-bit) Value, name it “TcpAckFrequency”

5.       Right-click the new TcpAckFrequency value and select Modify, enter “1″ (Hexadecimal radio button should be selected)

6.      Right-click on the interface and select New > DWORD (32-bit) Value, name it “TCPNoDelay” (note that TCP is all uppercase this time – that’s intentional)

7.       Right-click the new TCPNoDelay value and select Modify, enter “1″ (Hexadecimal radio button should be selected)

8.      Verify that both TcpAckFrequency and TCPNoDelay now show up in the adapter’s property list with types REG_DWORD and values 0×0000

No more answer.

That´s nice.

It´s not the way to make the game "GREAT AGAIN".

 

After a patch, sometimes it may be necessary to fix the windows again.

 

Download Win7 Support Download again, do not forget before running choose the properties option to run as Administrator.

Good Luck 

[QUOTE=JohnCheker]

 Helps from   (Official)  or...   or  or


OFFICIAL l :

[QUOTE=]
 If you are experiencing lag, first thing you need to check is your internet, try to link to internet using ethernet cable instead of Wi-Fi, check if anyone is sharing your internet or if your bit comet is download something in the background, and restart your router/modem to reset the traffic. 

If these don't work, then you can try the following steps.

Method 1:

TCP no delay, which is basically an optimization of network traffic that tries to reduce overall packet volume but can cause extra latency in the connection. This should work on Windows 7 or Vista, though the same principle can probably applied to other operating systems as well.

1.       From a command prompt (usually in All Programs -> Accessories -> Command Prompt) run “regedit”

2.       Browse to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Tcpip\Parameters\Interfaces

3.       Browse the items under interfaces until you find one that has an IPAddress entry matching the network interface you want to affect (typically LAN IP addresses start with 192.168 or 10.0); note that if your IP address is automatically assigned by a DHCP server you may need to look for a matching DhcpIPAddress instead of IPAddress

4.       Right-click on the interface and select New > DWORD (32-bit) Value, name it “TcpAckFrequency”

5.       Right-click the new TcpAckFrequency value and select Modify, enter “1″ (Hexadecimal radio button should be selected)

6.      Right-click on the interface and select New > DWORD (32-bit) Value, name it “TCPNoDelay” (note that TCP is all uppercase this time – that’s intentional)

7.       Right-click the new TCPNoDelay value and select Modify, enter “1″ (Hexadecimal radio button should be selected)

8.      Verify that both TcpAckFrequency and TCPNoDelay now show up in the adapter’s property list with types REG_DWORD and values 0×00000001